TINYFAB PRINT PROFILES

TinyFab Filament Profiles

Select a material profile tuned for your printer.

← All printers

Bambu Lab A1 — Filament Profiles

PLA

PLA Basic

Balanced everyday profile for TinyFab PLA Basic.

Download .json Profile coming soon
PLA

PLA Matte

A tuned profile for smooth, low-gloss TinyFab PLA Matte prints.

Download .json Profile coming soon
PETG

PETG

A dependable profile for strong and durable TinyFab PETG parts.

Download .json Profile coming soon

HOW TO INSTALL

Add a profile to Bambu Studio

Download the JSON for your printer, 0.4 mm nozzle and material. Follow the first two steps to start slicing; AMS setup is optional. Screenshots show H2D as an example and may differ by printer or Bambu Studio version.

TFDownload → Import .json → Select your filament
  1. 01
    Import your downloaded JSON

    Import your downloaded JSON

    Download the matching profile above. In Bambu Studio, choose File → Import → Import Configs… and select the downloaded .json file.

  2. 02
    Select the printer and filament

    Select the printer and filament

    In Prepare, select your printer and 0.4 mm nozzle, then choose the imported Tinyfab3D profile under Project Filaments. Check the build plate matches the plate you are using. Sync info is optional for a connected printer; check the selected filament again after syncing.

  3. 03
    Optional: edit your AMS slot

    Optional: edit your AMS slot

    If you use AMS, open Device and click the pencil on the slot containing your TinyFab filament. Without AMS, skip these device setup steps and use the imported profile in Prepare.

  4. 04
    Optional: confirm the slot material

    Optional: confirm the slot material

    Where supported, choose Tinyfab3D and the matching material, then confirm. This screenshot shows PLA Basic; choose PETG for a PETG spool. The AMS slot setting does not replace the slicing preset: return to Prepare, verify the imported profile and map the correct slot when sending your print.